Best Desoldering Stations In 2022 – Reviews And Buying Guide

Disclaimer: is user-supported and we may earn a small commission whenever you chose products from our Amazon product links without any additional cost to you.

It is as important to get a quality desoldering station as it is when you buy soldering devices. Most people don’t want to spend too much time deciding which desoldering station they will get because they think it lacks importance. However, working with a bad desoldering station could cause damage, and beginners are mostly the victims of these situations.

To help you avoid these issues and purchase the best desoldering station right away, we have collected the best products and tested them by professional soldering experts. These are their results....

Reviews of the Best Desoldering Station 2022

1. YIHUA 948 ESD Safe 2-in-1 Desoldering Station


  • Weight: 9.58 pounds
  • Dimensions: 15.2 x 8.7 x 8.4
  • Material: Plastic, Steel
  • ESD Safe
  • Solder Iron: 60W - Temp
YIHUA 948 ESD Safe 2-in-1 Desoldering Station

You will need the best control over your desoldering project along with a precise result. The YIHUA 948 ESD Safe 2-in-1 Desoldering Station is the machine that we recommend. You may find many other desoldering stations, but one this capable is hard to come by.

Its control panel is amazingly organized, with the digital display on the top of the buttons. This screen displays the temp throughout the process. You are free to choose between Fahrenheit or Celsius. The machine features a durable and well-designed iron. For soldering, the iron sustains 60 watts. To desolder your application, the device has 80 watts of power.

Never worry about buying extra equipment as you will also get a desoldering gun in the package. The PID temp control allows the temperature to stay at the right status. With a smart automatic mechanism, you will always be informed of the stats of the machine.

If there is any fault in the sensor, the station will display the “S-E” signal. While heating the desoldering gun, it shows the “Pht” signal. Since we all want to save energy, the machine holds the sleep and auto-shutting feature. It is the perfect combination of user-friendliness and smartness.


  • Almost instant heat-up making it a fast soldering station compared to soldering kits.
  • The readout can be switched to Fahrenheit – a simple feature that is missing in most similar stations.
  • Rates for 80W, the desoldering gun can be useful on thick ground planes.
  • The gun is pretty easy to clean.
  • Real-time temperature correction of the station allows proper usage of the desoldering vacuum after you have soldered.


  • The vacuum pump does not have top-notch suction.

2. American HAKKO ESD Safe Portable Desoldering Tool


  • Weight: 1.1 pounds
  • Dimensions: 12.05 x 11.73 x 2.91
  • Power Source: Power Cord
  • Wattage: 140 watts
  • Part Number: FR301-03/P
American HAKKO ESD Safe Portable Desoldering Tool

The American Hakko FR301-03/P ESD Safe Portable Desoldering Tool is the representation of perfection through epic creativity. It is small, easy to handle, and can be used on your regular DIY or industrial jobs. Temperature control is the biggest trait that this device has.

This desoldering tool does not only let you change the unit from F to C, but you can also adjust the temp from the buttons on the handle. Desoldering stations are already easy to clean, but this particular machine is even better at that. It doesn’t wear out easily, and the parts can be cleaned out quickly after every usage.

The manufacturers thought about the health of the consumers. Hence, they avoided lead to use on this machine. Worry about the temp preciseness as the device automatically keep the heating output correct, thanks to the closed-loop sensor. You can install or change the nozzle quickly using the swift release tool.

Unlike other desoldering stations, this one produces lesser vibration and noise. But worry not, as the output is still top-notch. Its desoldering gun is also a praiseworthy part with its comfy grip. It is the item you require.


  • Quality performance on removing lead-free solder without making the PCB dirty.
  • Does not overheat the PCB and ensures zero damage to the traces.
  • Easily adjustable temperature setting lets you pick up to 930 degrees.
  • Quick change of the nozzle is possible using the fast-release tool.


  • The barrel can get easily clogged and needs frequent cleaning.

3. YIHUA 948 Desoldering Station with Auto Shutoff


  • Weight: 9.19 pounds
  • Dimensions: 15.39 x 8.94 x 8.11
  • Material: Metal, Ceramic, Iron
  • Heat Settings: 662℉~896℉
  • Vacuum Pressure: 0.05MPa
YIHUA 948 Desoldering Station with Auto Shutoff

When it comes to soldering or desoldering needs, YIHUA stays pretty top with their top-notch items. The YIHUA 948 Desoldering Station is a smartly innovated multifunctional device. It tackles your desoldering tasks effectively. Even the additional accessories are of the best quality.

Let’s start with the temp control of this machine. For heating the desoldering gun and making your work precise, the station allows between 662 to 896-degree F temp. Adjust the temp using the buttons. Take help from the digital LED display that can show the temp in F or C units.

Like how a quality desoldering machine should be, YIHUA 948 has a sleep feature. This feature takes the device to sleep mode to conserve energy. There is also the shut-off mode. The machine can disconnect solder joints so quickly. Its suction capability is high while the machine keeps the nozzle temp steady.

All these features let the desoldering process go smooth. Its power limit is up to 80 watts. You are free to clean the filter tube with no difficulty or replace it with a new one. Its one-hand-use design makes for a fast yet trouble-free soldering station.


  • The auto-shutdown feature makes this station excellent for long uses without safety issues.
  • Uses PID temperature stabilization helps the gun to output the right temperature without burning the PCB.
  • The station can be used for both soldering and desoldering tasks by purchasing a soldering gun.
  • The filter tube can be cleaned or replaced.


  • Takes a while to get heated for use.

4. Aoyue Digital Desoldering Station with Built in Vacuum Pump


  • Weight: 11.1 pounds
  • Dimensions: 14 x 10 x 14
  • Power Source: AC
  • Voltage: 110 Volts
  • 80W heating system
Aoyue Digital Desoldering Station with Built in Vacuum Pump

Packed with quality features, the Aoyue 474A++ Digital Desoldering Station is designed with simple yet smart methods. Its lightweight and small body make it easy to move around. Speaking of moving, there is also a handle at the top. It has a durable body too.

This powerful desoldering station has an auto-sleep feature that lets it save energy. You can adjust the sleep mode between 1 to 60 minutes based on your need. Its power can reach up to 80 watts. Its temperature control is innovated with utmost care. There is a heating tool made of ceramic materials that provides it a long-lasting impression.

The main control panel is so user-friendly as even a beginner can understand everything quickly. Its large LED screen displays the temp clearly. With an airflow of 15 L/min, the vacuum pump runs on 12 volts. You get all the additional accessories necessary with the machine. These items include three desoldering tips, spare filters, a power cord, a user manual, etc.

To provide you a safe work time, the circuitries are arranged without crossing each other. So, there is almost no chance of any electrical accident. We advise you to get this desoldering station soon.


  • The station provides 70W high power for heavy-duty desoldering tasks that cannot be done with battery-powered options.
  • Digital display allows you to calibrate the temperature easily.
  • Features an auto-sleep mode that can be customized from 1 to 60 minutes timer.
  • No crossing circuity, meaning it is very safe to use compared to most soldering stations.


  • Changing the tip needs disassembling the gun, which can be annoying.

5. YIHUA 948-II Hot Air-Rework, Soldering Iron and Desoldering Station


  • Weight: 11.88 pounds
  • Dimensions: 13.3 x 11.7 x 8.4
  • Material: Plastic, Steel
  • Heat settings: 392℉~896℉
  • Peak power: 725W
YIHUA 948-II Hot Air-Rework, Soldering Iron, and Desoldering Station

You may want a machine that provides many features at the same time. The YIHUA 948-II Hot Air-Rework, Soldering Iron, and Desoldering Station is a complete system for anything related to soldering work. As its name suggests, it has functions for many processes.

Buying separate machines for soldering, desoldering, hot air-rework, and suction pen can take lots of money. This machine is a combination of them. For desoldering, the device has 75 watts, and for soldering, its power is 60 watts. The hot air-rework has 650 watts power sustaining capability.

Faster than regular, this device offers swift temperature control. It is possible due to the PID system. So, the work outcome will always be accurate. You can also switch between auto or manual modes to control the temp yourself.

The machine has a digital screen to show F and C units. By switching to sleep mode, the device can save electricity. While hot air-reworking, you can easily change from hot to cool air.

You will get different signals based on the machine’s status. The manufacturers added additional components so that you can replace any parts you need. It requires 110 to 127 Volt to run.


  • The safety shutdown feature makes sure the gun gets cooled down properly.
  • Easy to set the temperature with a digital display showing Fahrenheit temperature.
  • Has the PID program that helps with intelligent heat control.
  • Soldering station provides 392 to 896 degrees F temperature for all-around soldering tasks.


  • Both soldering iron and the desoldering gun have the same connector, meaning you can’t use the station for both tasks at once.
  • The plastic filter housing should have more heat resistance.

6. NOEVSBIG Hot Air Rework and Desoldering-Gun Station


  • Weight: 3.67 pounds
  • Dimensions: 10.2 x 6.77 x 6.02
  • Color: Black
  • Style: Rework station
  • Material: ABS
NOEVSBIG Hot Air Rework and Desoldering-Gun Station

Some of us want a simple desoldering machine that gets the job done in a perfect manner. The NOEVSBIG Hot Air Rework and Desoldering-Gun Station is a two-in-one device. It handles the work with its excellent temperature control and high-powered components. Getting this item in your workplace will be a change in the phase.

You can make use of the temp control that ranges from 132 to 532 degrees to perform your hot-rework projects. Keep track of this temp using the digital display. It can raise its temp within only 5 to 10 seconds.

The heater is made of ceramic to improve the machine’s lifespan. Its microcomputer control system provides smart auto temp control. You do not need to worry as there is an auto shut-off feature in case of overheating issue. Its temperature memory feature set the machine to its previously adjusted temp after turning it on.

For a better experience, the machine goes stand-by mode when necessary. The device has a low noise of 45 dB. There is also an auto-cooling feature. Consider getting this desoldering station in your workplace.


  • The auto-off feature turns off the gun whenever you place the nozzle on the magnetic holder.
  • Self-explanatory and easy controls allow it to be used by complete beginners.
  • The temperature memory function works like a charm, and you don’t have to recalibrate the temperature after turning the device on.
  • Grounded and proper build; reduced chances of electrical damage.


  • The bag provided with the set smells bad.
  • The tips on the set are cheaply made.

How to Select the Right Desoldering Station

Desoldering stations fulfill the different requirements of the electronic manufacturing industry, which has evolved over the past few years, keeping pace with technological advancements.

As a result, people usually go through bad phases when purchasing the right desoldering station because of its perplexing features. The available stations usually vary in many aspects. Thus, some factors are provided below to help you out of this problem and help you possess the appropriate desoldering station for your job.

Power Suction

It would help if you considered the suction power of the station you select as desoldering stations use the principle of vacuum to remove solder. And when dealing with delicate circuitry, it is easier to depend on the bigger suction power.


One of the most important factors you need to consider is the temperature range available on the machine. Most of the desoldering machines come with a temperature setup that starts from 300 degrees to 900 degrees centigrade.

The wider the temperature range, the more advantage you get because it covers most applications. On the other hand, low thermal recovery can cause problems, such as cold solder joints.


Some of the desoldering stations come alongside a wide range of accessories. It includes broad tips, brushes, sharp tips, etc. These accessories are highly imperative when you are working with surgical solder removal on complex circuitry.

Shape and size

For choosing the right desoldering station, you need to make sure that you select the accurate width. It could be the same width or slightly narrower than the thing you’re going to desold. Using an iron tip might be a better option.

ESD safe designs

Nowadays, machines are much more delicate and more compact compared to the ones that were used before. The new age desoldering stations offer digital display, password lock, and digital calibration features that are too competitive.

Most device failures or even the smallest defaces could lead to failure leakage specifications. So, it is important to make sure that the unit has long-term reliability ESD safe designs.

When it comes to repairing electronics, desoldering is an important trait to imply. From an early age till now, desoldering stations are ruling the electronic industries, and that is why purchasing the proper one is essential.

These are the most crucial considerations that one must need to keep in mind while picking an accurate desoldering station to experience effective and efficient working.

Type of Desoldering Station

A soldering station is essential equipment for accomplishing the soldering of various electronic components. That is why these stations are vividly used in electrical engineering and are considered primary accessories in different areas like electronic laboratories, electronic repair work stores, and different industries.

We all are aware that there are only two types of desoldering stations- lead desoldering stations and lead-free desoldering stations. Let us know more about them.

Lead desoldering stations

Lead desoldering stations are one of the most popular soldering stations that have been used by mankind for a long period and have proved to be a pivotal part of the electronic industry.

However, they have fallen apart in the last few years because of lead-free soldering stations’ arrival. That is because the lead soldering stations are responsible for causing environmental damage and causing health risks for humans.

They provide an upper hand to the user because of their versatility in accomplishing multiple activities. Also, they require a lower temperature to heat, ranging from around 180 degrees. That is why most of the electrical industries prefer to use these desoldering stations.

Lead-free desoldering stations

Most of the countries encourage the users to purchase lead-free soldering stations since it reduces the health risks involved in lead-based desoldering. That is why they are considered as an environmentally friendly accessory that provides healthier service. The soldering temperature that is required for most of the lead-free desoldering stations is around 270 degrees.

These magnificent soldering stations are widely used for soldering different boards like PCB. However, the lead-free desoldering stations do not provide an economic advantage as they are more expensive than the lead desoldering stations.

These are also considered inefficient and inappropriate for usage during performing certain applications, which eventually made them less popular than the lead desoldering stations.

Final Note

Whether or not you are willing to research a lot for your soldering stations or just need a few recommendations, this list could hopefully help. Just go for the first one we mentioned on the list if you are still not sure which one to purchase.

As we mentioned testing these devices out ourselves, we can confidently say that these soldering  irons are excellent for beginners and good for professional users.

The buying guide and other information we mentioned will help you get more in-depth knowledge. So, make sure to check them out if you want to do the research yourself.

Last Updated on 1 year by Richard Boyer

  • June 28, 2022
Richard Boyer

Richard Boyer has been a professional welder for over 27 years of his life, and now he is a trainer and blogger providing critical information to anyone interested in welding. He is helping out both hobbyists, novice and professional welders to learn newer and better techniques. Read more about me

Click Here to Leave a Comment Below 0 comments

Leave a Reply: