Best Lincoln Welding Helmet Reviews 2022 – Top Picks Reviewed

Disclaimer: Welderscave.com is user-supported and we may earn a small commission whenever you chose products from our Amazon product links without any additional cost to you.

We want our readers to read our product reviews and know that each item we recommend has been thoroughly examined and tested by people who understand the demands of welding, and the needs of the welder. Welderscave also reviewed the top rated Miller and Jackson helmets. Don't miss them if you are a fan of these brands. 

Best Lincoln Welding Helmet Reviews 2022

1. Lincoln 3350 Welding Helmet

This is an auto darkening welding head covering that uses batteries to power the sensors that detect the arc. The batteries in this unit will last for a long time. It is a CR-2450 battery that is available at many stores and shops. The battery also has a solar back-up. The battery will be recharged by solar technology, but at some point, will still need to be replaced.

The electronics of the hood will not be affected by normal sweat and condensation that occurs when you are working in a high heat environment. Your controls for the sensitivity and delay, as well as the sensors, will operate even after you get hot and begin to perspire inside the helmet.

The lens will darken from a #5 up to a #13 shade so you can work with low or high amperage welding processes. This device can be worn while you are welding, cutting metal or grinding so it is a versatile piece of equipment.

The headgear is adjustable so it fits all head sizes. It can be worn by beginning welding students or by professional welders. It is good for either male or female wearers.

Pros

Cons

2. Lincoln Electric K3034-4 VIKING Welding Helmet

One of the great attributes to this head covering is the larger than average viewing area it has. The viewing area covers 12.5 square inches. It is covered by an auto darkening lens that are triggered by a total of four arc sensors. 

This Lincoln welding helmet is also unique because of the comfort it offers. The headgear contours to the head of the wearer. It has the weight of the helmet distributed over six pressure points so you are more comfortable and capable of wearing the device for several hours.

The headpiece has the capability of being used when you are welding and when you are grinding. The button that switches the helmet from weld to grind is located externally so that it is easy to reach. You can switch processes without removing the device, and continue working. You can also inspect your work without removing your head covering.

The technology used in the creation of the lens and the sensors that signal the changes in the lens provides you with crystal clear images of your work area, weld puddles, and completed weld.

This device weighs about three pounds. It has shade variances of #5 to #13. It is battery powered with a solar back-up and can be worn with a hard hat.

Pros

Cons

3. Lincoln Electric K4134-1 Lone Star Welding Helmet

This is an auto darkening helmet that has lens shades from #9 to #13. It is better suited to use during high amperage welding processes because of the darkness of the shades. It does have an adjustment so you can choose the shades and the amount of delay time between arc recognition and the darkening.

The viewing area measures 4 ½ inches x 5 ¼ inches. The device is made of plastic so it is much lighter than many protective helmets. It can be used when you are welding and when you are grinding because it has a grind mode.

The sensors that trigger the auto darkening sequence are operated by triple A batteries with a solar back-up. The solar back-up helps to extend the life of the batteries so you change them less often. You can expect to get 3000 working hours between battery changes.

You do get an extra front cover lens with this decorative welding hood. It has decorative graphics that make you stand out from the crowd. It will fit both small and larger head circumferences. It can be worn by men or women and can be used by professionals or beginners.

Pros

Cons

4. Lincoln Electric K3282-2 Viking Welding Helmet 

This Lincoln product has an automatic on and off functionality. This saves battery life and increases the durability of the headgear. It uses triple A batteries to power the sensors. You get a variable shade of #9 through #13 so you are highly protected. You also get controls that allow you to decide and set the sensitivity and the delay time length.

You do not have to remove the helmet in order to inspect the work you have just completed. The adjustments allow the device to fit securely without being uncomfortable or straining. It is light enough that it does not cause neck strain or shoulder pain. It can be worn by men or women,

You can wear this headgear along with your hard hat if you work in a plant or area that requires hard hats for safety. The unit only weighs 2.74 pounds and measures 13 inches, x 11 inches x 10 inches. You can use it with any of the normal welding processes. It is also low profile enough that it will allow you to work in more constricted areas. 

Pros

Cons

5. Lincoln Electric VIKING 1840 Black Welding Helmet

This welding hood comes with a bandana, a carry bag, decal sheets for customization, and lenses. It has 4 lens technology designed into it so you get the most optical clarity available in a welding device.

The lens of the device is auto darkening. That means that when the sensors on the headpiece recognize that an arc has been struck the lens covering your eyes will automatically darken to protect your eyes from the damaging effects the bright welding arc creates.

The headpiece provides full-face coverage. Your face, ears, and neck will be adequately covered so that the heat, splatter, or possible slag will not create an injury. Inside the helmet are ratcheting straps that you adjust to make it fit you comfortably and securely. It is great for men or women, and for beginners or experienced welders.

The first battery to power your device will be shipped with the unit. Then after 3000 to 5000 hours of the operation time, you will need to change the battery. The viewing area is large and the quick response of the lens shading will allow you to work without having to remove your helmet for inspection, or grinding.

Pros

6. Lincoln Mojo Graphic Welding Helmet

This is a uniquely designed and decorated welding helmet for the people who are one of a kind. It comes complete with a carry bag and a bandana. It has amazing graphics that reveal your inner personality.

The headpiece is decorative but it is also a serious piece of protection equipment that passes and meets all standards of excellence. It has auto darkening technology built into it and the lens can darken from a #5 to a #13 so it is great for low amperage welding and for high amperage too. It also has a grind mode so you do not have to waste time taking off the helmet to clean up a weld. You just flip the switch and get to work grinding.

It has electromagnetic sensors and you get controls to determine how sensitive the helmet will be. You also get to set the amount of delay time the lens has before changing shades. 

The comfort level of this piece is high. It is completely adjustable so you make it fit your head perfectly. It can be worn by men or women and can even be adjusted to fit a youth size head. It can be used with all welding processes, and by hobby welders or experienced welders.

Pros

Cons

Buying Guide Of Lincoln Welding Helmets

A great welding helmet allows you to do the work you need to do and be safe while you are doing it. To choose the best welding helmet you have to consider what you need the helmet to do for you, and what each headpiece is capable of doing.

The following features should be considered when you are choosing the right personal protection equipment.

Auto darkening or Fixed Shade Lens?

Welding helmets either have a fixed shade lens or they have auto darkening lenses that can darken to a multiple numbers of shades.

Fixed shades are great if you basically do the same type of welding with the same amperage every time. The lens cannot be made lighter or darker, but you do have the ability to change the lens to a lighter or darker one if you need to do so.

Auto darkening lenses rely on battery-operated sensors that signal the lens to darken after they sense an arc ignition. With these helmets, you do not have to worry about lifting or removing the helmet to inspect the weld you just made. Some of these helmets can also be worn while you are performing tasks like metal cutting or grinding.

Number of Sensors

If you choose an auto darkening helmet the number of arc sensors is important. These devices will have 2 or more arc sensors. The increased number of sensors can make the helmet more sensitive to the flash from an arc, but they can also prevent the missed darkening opportunity. If a sensor is blocked it might not detect the light of the arc, but when you have multiple sensors positioned on the hood then there is very little chance of all of the sensors being blocked.

Increased sensors simply mean an increased amount of protection and safety for the welder.

Adjustments to Sensitivity and Delay Time

Another feature the auto darkening helmets offer is the ability for you to set the sensitivity of the device. You can determine when you want the lens to be triggered and you can determine how long a time span will be between the sensing of the arc and the darkening of the lens.

Size Adjustments

Most headgear that is designed to protect you from the heat and intense light created when welding will have the ability to be adjusted to a size that fits you. You want to get a piece that has easy to make adjustment straps, and you want one that will not stretch out or loosen while you work.

Final Note