Best Portable Welding Fume Extractor & Exhaust Reviews 2022

Disclaimer: is user-supported and we may earn a small commission whenever you chose products from our Amazon product links without any additional cost to you.

Welding fumes containing carbon monoxide, argon, hydrogen fluoride, etc. could be horrible for your health. The fume can also have metals like arsenic, lead, aluminum, etc.

A high-quality welding fume extractor can ensure your healthy state by removing the deadly fume from your contact! So, if you don’t want to have serious health issues, getting a fume extractor is a must. 

Best Portable Welding Fume Extractor

A portable fume extractor is a best friend to both newbie and professional welders as it can be carried easily and transported without much nuisance. Keeping the portability in mind, we have created the list of best welding fume extractor devices available in the market.

The list below results from dedicated research and testing on our facility in search of the best item. You can end your search for a quality fume extractor here and get yourself an item recommended by hundreds of professional welders. 

Comparison Table On Our Top Picks





Vatican Solder Smoke Absorber Fume Extractor Fan

Made of ESD safe, lightweight & durable material

KOTTO Soldering Smoke Absorber

Easy to replace the filter, Includes one extra filter.

BAOSHISHAN Solder Fume Extractor

Effectively filter the smoke, dust, harmful gases

Kulannder Handy Carry Solder Smoke Absorber

Powerful Remove Fume Extractor & handy carry

KNOKOO MINI Welding Fume Extractor FES150

Filtering Efficiency:0.3μm 99.97%

Lincoln Electric X-Tractor Mini Fume Extractor

High Vacuum Fume Extraction System

Best Welding Fume Extractors Review 2022

1. Vatican Solder Smoke Absorber Fume Extractor Fan


  • Weight: 3 pounds
  • Dimensions: 9.5 x 6 x 11 inches
  • Voltage: 110 Volts
  • Wattage: 14 watts
  • Material: Plastic
Vatican Solder Smoke Absorber Fume Extractor Fan

If you work in any workstation, then you probably know that the fumes exhausted from welders are very much of a nuisance. But you won’t be worrying about that if you have the Vatican Fume Extractor. It is an effective smoke absorber that can keep the workplace up to par. 

The Vatican Solder Smoke Absorber is very lightweight and doesn’t take much space. The carbonless brush motor is powerful and designed to be proficient. You’ll notice that it doesn’t produce much sound either.

Along with noise reduction mechanisms, the fume extractor is also equipped with three active carbon filters. They can easily be replaced with new filters making it cost-efficient. The smoke extractor can be tilted in any direction, offering peak fume disposal.

The Vatican FA496 we have here has the same performance as the previous 493 models and comes with extra replaceable filters. The smooth, elegant design makes it very attractive.

It is a must-have product for welding workstations. The smoke extractor is very lightweight and compact, making it portable.


  • Replacing the carbon filter is easy due to a dedicated filter slot.
  • You can adjust it to various angles to filter fumes easily.
  • Noise level isn’t too high.
  • ESD safe; does not have issues while working in high-temperature situations.


  • Not suitable for cigarette smokes.

2. KOTTO Soldering Smoke Absorber


  • Weight: 3.87 pounds
  • Dimensions: 12.99 x 11.93 x 5.83"
  • Flexible Absorber Tube
  • Activated Carbon Filter
  • Compact Size
KOTTO Soldering Smoke Absorber

Welding stations are susceptible to flux smoke that can harm your organs severely. But this particular smoke absorber can get rid of all that very easily. Built with intricate machinery, it can be adjusted at your disposal and absorb the harmful fumes. 

It has a 24-inch flexible tube that can be adjusted by the welder so you can point it in whatever direction you might need. The 6000 RPM fan produces minimal sound, and its optimized suction capabilities allow it to absorb smoke from 6 inches away. The rotation speed is adjustable as well.

The fume extractor is made of high-grade ABS components, which makes it very durable and sturdy. There’s an iron plate in the smoke absorber that can provide sufficient anchor. The carbon filter is approximately 0.4 inches thick and captures all sorts of chemical fume.

This smoke extractor is very lightweight and small enough to be considered portable. The product also comes with one extra replaceable activated carbon filter. The color and the sanded finish make it very attractive. The rubber feet at the base provide steadiness.

If you want to keep your workstation safe from hazardous fumes, then you should consider having one the KOTTO Soldering Smoke Absorber.


  • The fan provides high-suction up to 6000 RPM. Fan speed can be adjusted.
  • 55 dbm noise level is silent and does not cause disturbance to your work.
  • Great for both soldering and welding due to its tube.
  • The carbon filter works well filtering out fume, and the box shape makes it easy to replace the filters.


  • Not suitable for very high temperature; don’t keep it too near of welding or soldering metals.

3. BAOSHISHAN Solder Fume Extractor


  • Weight: 24.9 pounds
  • Dimensions: 20 x 17.5 x 16 inches
  • Material: Metal
  • High Density Composite Filter
  • Turbocharging duct technology
BAOSHISHAN Solder Fume Extractor

Inhaling the fumes that are exhausted in welding stations can severely harm your lungs and other organs. A fume extractor like BAOSHISHAN has the ideal attributes to be kept in such an environment. It can be adjusted to your workbench and be used to improve the efficiency of the station.

The fume extractor has a considerable dust capacity, which makes it stand out from other smoke absorbers. The square-shaped core is far more effective than a flat fitter core, making it very cost-efficient.

The base of the fume absorber has four wheels that make it easily moveable. The motor used here is a frequency converter DC motor, which means it consumes less power. So it’s safe to say that this product is very environmentally friendly. The tube is flexible and can be disassembled or adjusted at your comfort.

The machinery here is seemingly very complex but doesn’t produce much sound. The filter density is higher than the ones you’ll find in others. Of course, anyone using this frequently must be aware that the filter must be replaced after a substantial usage.

A welding workstation will be saturated with poisonous smoke if you don’t use a fume extractor. BAISHISHAN offers an excellent fume extractor that can get the job done very easily.


  • Has triple filtration, including a carbon filter that works better than most extractors.
  • The extract mouth can rotate easily and provide excellent suction power.
  • Comes with castor wheels for easy relocation.
  • The pipe is flexible enough to bend any way you want.
  • Quieter than most options here.


  • A bit bigger than most fume extractors as it has triple filtration.

4. Kulannder Handy Carry Solder Smoke Absorber


  • Weight: 1.38 pounds
  • Dimensions: 4.8 x 2 x 4.8 inches
  • Material: Metal and Plastic
  • Updated nice wire design
  • Easy to replace carbon filter
Kulannder Handy Carry Solder Smoke Absorber

What we have right here is a simple smoke extractor with unique features. A fume extractor is essential in welding since the fumes can cause inconvenience and serious harm. Kulannder’s is a great choice for something like this.

Kulannder has designed its fume extractors very efficiently after consulting with engineers and customers alike. After constant improvement in every model, they have made this fume absorber to have peak performance.

The products include filters made of activated carbon and foam. The filters themselves are easily replaceable as well. The product has a very impressive lifetime of over fifty thousand hours. The fume extractor is very lightweight as well. So you can carry it anywhere easily.

The frame of the smoke extractor is very sturdy because it was made out of high-quality aluminum alloys. It makes the fume extractor very durable. It is very suitable for any weldings like glasswork or electronics and even arts and crafts. But one shouldn’t go overboard with its usage. Constant usage for over 24 hours can damage the machine. 

If you have ever stepped foot on a welding station, then you know what kind of a mess these fumes make. Not only is it obnoxious, but it’s also very harmful for health. That is why using the Kulannder Smoke Absorber is so essential.


  • Made of aluminum alloy, making it durable and better heat resistant than plastic extractors.
  • Up to 50,000 hours of lifetime; lasts long.
  • The wire has a switch for easy operation of the extractor without having to remove the plug.
  • The carbon filter can be replaced easily.


  • Highly suitable for soldering; not the best performance at welding.

5. KNOKOO MINI Welding Fume Extractor FES150


  • Weight: 13 KG
  • Dimensions: L425×W250×H410mm
  • Voltage: AC 110V
  • Maximum Power: 180W
  • Noise:<55dB
KNOKOO MINI Welding Fume Extractor FES150

This multifunctional fume extractor can easily get rid of all the chemical flux smoke from welding stations. It is equipped with high-tech components and is made with quality materials. The usage of this fume extractor cannot be neglected if you want to keep your workstation safe and secure.

The smoke extractor has a triple layer filtration method. It ensures the fact that the air stays purified much more effectively. The DC brush motor implies less power consumption with effective results.

The duct is very flexible and can be adjusted as per your need. Through this, you can easily use its suction abilities to get rid of the maximum amount of flux fume at a time. You will notice that the product has a wide range of capabilities. Dust removal, smoke removal, harmful fumes removal, etc. functions are available through this marvelous instrument. 

This fume extractor also has brilliant safety features. The power failure protection protocol allows the user to turn off the 3-in-1 switch found on the side, which will cut off the power supply. The buckle is thick-plated and designed to be corrosion resistant. The handles on the side will help with its mobility.

Even though this particular fume extractor is quite hefty, its weight is compensated through its excellent functions. It can be beneficial if you can use it the right way.


  • Three layers of filters can ensure a healthy environment in your workplace.
  • You can easily adjust the work volume with the knob.
  • Less than 55dB noise level for a quiet operation.
  • Features a DC brushless motor that increases its lifespan.


  • Doesn’t come with wheels for high portability.

6. Lincoln Electric X-Tractor Mini Fume Extractor


  • Weight: 52 pounds
  • Dimensions: 16.8 x 15.6 x 29 inches
  • Quiet Operation
  • Current Sensor
  • Lightweight and Portable
Lincoln Electric X-Tractor Mini Fume Extractor

Fume extractors are essential in the welding stations. But choosing the right one might be difficult. Lincoln Electric offers a straightforward and affordable solution. The fume extractor is very compact, and you can take wherever you want. Even though it’s small, its effectiveness is not affected. 

The first and the most obvious thing that you should know about the Lincoln Electric Fume Extractor is the fact that it’s so light. Because of its lightweight and compact size, it is very portable. Uses an optimized vacuum fume extraction method to get the job done and done right.

The effectiveness of this product is unquestionable. The fume absorber comes with a current sensor that can stop or start the device based on the detection of current. The noise reduction tech used here makes sure you get the peace you need. It can be used for a variety of projects. This sort of versatility is rare in smoke extractors.

This product is made of high-grade material, which makes it effectively durable. Including an EN 20 Nozzle, the fume extractors have attractive features that can only make your job easier. 

If you want a portable, affordable and quiet fume extractor, then look no further. Not only is it portable, but the Lincoln Electric Fume Extractor is also very versatile when it comes to welding projects.


  • The current sensor technology works great whenever it detects electrical flow.
  • Suitable for heavy-duty MIG welding and light-duty Stick and FC welding.
  • Comes with a heavy-duty exhaust pipe that can be close to welding or soldering applications.
  • Lightweight compared to most of the similar extractors.


  • Not the quietest option.

Buyers Guide Of Welding Fume Extractor

When welding any material in your factory, wearing just a helmet isn’t a wise choice. It is because wearing one may protect yourself from the harmful fume, but the air still stays deadly for any other individual, such as the factory staff or other operatives.

You need to make sure that the minimum air circulation in the area is 10 meters per second, and it is clear to see and hear everything through the air. Implanting a whole-plant system can be costly.

So to prevent the inhalation of welding fume, you need to get yourself a fume extractor. To give you an idea of how to buy a welding fume extractor of good quality, check the tips listed below.

Different Features and Portability

When going through different fume extractors, make sure that the one you go with has many features and is easy to operate other than just being a simple fume extractor. For starters, it should have multiple levels of filter to use on different levels of fume. It should be easy to switch the filters as well.

Aside from just removing the fume, it will be great if it can take out all the bad odors from the air. Another good feature is for the filters that can be removed and cleaned. Also, a spark deflector feature won’t be bad. A portable one should be your primary goal. Just make sure that it offers more than any regular extractor would do.

Durability and Longevity

It is a must to ensure that your fume extractor has enough durability to last a long time. Being used in a factory can easily put many dents and stuff on the machine. One with highly durable stainless steel built components will rid you of the hassle of buying a new one again and again and also will save your money in the process.  Not to mention, any durable stuff is welcomed when it comes to being used in a factory.

Changing of The filter

If you go for the MIG torch option (which is recommended, as they are the most effective by far), It will be a good thing if the filter does not need to be changed many times in an everyday environment. An ideal extractor may require changes every 15-20 reels of MIG wire consumed, so keep that in mind when choosing one.

Suiting the Environment

Not all fume extractors are suited in every type of work environment. For example, a light-duty fume extractor can easily be damaged. It happens when its filters are ripped through in a harsh environment. 

Safe and Secure

When welding in your workplace, not only fumes but sparks are generated in the process as well. A fume protector that has the capability of deflecting sparks to protect the operators and other belongings from catching fire should be the one that you can look for. Make sure to extinguish the sparks before they reach the materials to be completely safe in your industry.

Final words

Do you hate the loud noise of fume extractors? Well, then we would have to recommend the KOTTO Soldering Smoke Absorber. Even though the fan has a speed of 600 RPM, it does not produce much noise, giving you the proper environment for welding! Also, the carbon filter makes sure that no deadly fume is present, giving you the health benefit. 

The BAOSHISHAN extractor is also an excellent product when it comes to environment-friendly features. It requires less amount of power due to its frequency converter DC motor. It is also highly portable and can be easily adjusted! 

Whether you are a professional or a hobbyist welder, these portable fume extractors are excellent for your health. Also, it keeps a clean environment when you are welding, making sure that you can focus on your work without fumes going into your eyes or lungs!

Last Updated on 1 year by Richard Boyer

  • June 28, 2022
Richard Boyer

Richard Boyer has been a professional welder for over 27 years of his life, and now he is a trainer and blogger providing critical information to anyone interested in welding. He is helping out both hobbyists, novice and professional welders to learn newer and better techniques. Read more about me

Click Here to Leave a Comment Below 1 comments
Chance Cook

I agree that having a portable fume extractor would be helpful for any welder, new or professional. I can’t even imagine how terrible it would be to inhale welding fumes. So having a way to extract them seems to always be the safest idea.


Leave a Reply: