Best Soldering Irons For Jewelry Making – Reviews & Analysis

Disclaimer: is user-supported and we may earn a small commission whenever you chose products from our Amazon product links without any additional cost to you.

A soldering iron is not an item for a specific purpose. It has lots of applications, and jewelry making is one of the most common usages of it. Apparently, if you want to make quality pieces of jewelry, you should get a soldering iron soon. However, it is easier to say than to do.

Thinking about all the troubles you may go through finding the best iron, we discussed it with the experts. Our prime goal was to sort out some of the best soldering iron for jewelry makers. We checked various factors and finally were able to make a list. We also added a buying guide later.

Best Jewelry Soldering Iron 2022 Reviews

1. Tix Solder Kit – Jewelry Repair and Craft


  • Weight: 2.4 ounces
  • Tix Solder: 1/4 ounce tube
  • Tix Flux: 1/2 fluid ounce
  • Tix Anti-Flux
  • Use with torch or soldering iron
Tix Solder Kit – Jewelry Repair and Craft

Since you need the best items in your jewelry workshop, the Tix Solder Kit – Jewelry Repair and Craft should be an item for you to buy. It comes with different soldering parts that make it worth the purchase. Not to mention, the contents will let you solder a wide range of soldering metals, including gold, silver, platinum, or stainless steel.

You will get some TIX solder tubes where each has a weight of ¼ ounce. They are highly-powerful and can easily top any other solder you find. Since they can avoid getting tarnished, they are the perfect items to apply to your jewelry metals. These solders have a melting point of 275-degree F, which does not take much to get. The package contains 20 of them.

Use the liquid fluxes in order to protect any area that you are soldering. They come in mini bottles that preserve them properly. 0.5 ounces of soldering flux is enough for your soldering tasks since jewelry soldering does not require much of them.

However, you will also get an anti-flux of the same amount as you may need to remove the flux. Try the product yourself.


  • The tix solder easily melts at only 275 degrees Fahrenheit.
  • Suitable for gold, platinum, silver, steel, and other alloys.
  • Easy to clean up the flux.
  • Best to use on silver without having unwanted color changes.


  • Would've liked no color changes or marks while soldering on gold.

2. ACE Jewelry Soldering Kit


  • Weight: 10 pounds
  • Make and Repair Jewelry
  • Magnesia Block 3"x 3"x 1"
  • Ceramic Board 4"x 4"x 1/2"
  • Solder Wire Soft 12" Long
ACE Jewelry Soldering Kit

The ACE Jewelry Soldering Kit has some actual useful contents in the package. Bring your soldering to the next level by quickening the process as you use this product. This package includes lots of different parts, all for your jewelry projects only. So, if your field of work is jewelry, you can take this item without much thinking.

Let’s go over everything the package includes. There is a butane torch that has a flame adjustment feature and provides a long nozzle. Then, you will find a soldering block. It is made of magnesia. If you want to have the best set-up for your work, use the ceramic board that comes with rubbery feet.

You will get three tweezers of various types and the right length for the best user experience. There are three solder wires- soft, medium, and hard. Each of them is 12 inches in length. The solder squares are also three in number.

You will get a pickle pot with a capacity of 16 ounces. They also included a copper tong. Experts tested these items and let us know that this is one of the best jewelry soldering products on the market.


  • Features a butane torch with adjustable flame for all kinds of jewelry soldering.
  • Comes with flux with a brush cap for easy application.
  • The torch has a proper build and metal housing for better durability.
  • The set has everything to start light-duty jewelry solders.


  • The bricks are a bit small.

3. ABSupus Soldering Iron Kit


  • Weight: 15.7 ounces
  • Dimension: 10.11 x 6.77 x 2.28
  • Material: Aluminum
  • Intelligent heater
  • ABS antiskid
ABSupus Soldering Iron Kit

As we are listing only the quality soldering irons for jewelry makings, we must add the ABSupus Soldering Iron Kit. Finding a soldering iron like this is hard if we are honest. The package is a multitool set. You will get an iron that has the correct power for jewelry works. But other items in the product are not bad either.

The soldering iron comes with a long cord and a pencil-type handle with a rubbery spot for gripping. It is possible to set the temperature easily and quickly with the help of the buttons on the handle. You can get safe work, as the handle is heat-resistant. The soldering iron has a wattage of 60, good for light-duty projects.

After your work, you can keep the iron on the stand. It is heat-resistant as well. Do not go for additional tips, as the iron features five tips of various heads. There is also a tweezer, solder wire, and a wire cutter to help you in any wiring works.

You can also use the desoldering pump if you need to remove soldering. The temperature range of it is between 428-896-degree F. Go for this soldering iron with no worry.


  • The tip heats up pretty quickly and is ready for use in 30 seconds.
  • Has a button for adjusting the temperature.
  • A desoldering pump is included that works quite well for taking off solders.
  • Comes with a complete set of accessories for jewelry and regular soldering with a bag.


  • The temperature control button seems to be too small.

4. JIAHCN Digital Soldering Station and Iron Kit


  • Weight: 2.2 pounds
  • Dimension: 9.8 x 6.3 x 4.7
  • Working Temperature: 200~480℃/392~896℉
  • Rated Voltage: AC 110V/60 Hz
JIAHCN Digital Soldering Station and Iron

What if you get a soldering iron of high-quality that also comes with a top-notch soldering station? That is what the JIAHCN Digital Soldering Station and Iron Kit offer. Not to mention, the product features some other additional parts and tools as well. This item is one of the favorites of lots of professional jewelry makers.

From jewelry to circuitry, the soldering station can handle them all. Its soldering iron is a unique one with a heater of alumina ceramic. You can get three benefits from this material. Firstly, it will provide a result with little to no oxidization. It also provides a safe worktime. Finally, by passing more heat to the tip, the iron makes the work quicker.

Ceramic heaters heat up fast like this one. You can control and keep track of the temperature level between 392 to 896-degree F. It only takes half a minute to change the temperature to the max. Regardless of your skill and experience, you can use this soldering station.

There are also five soldering tips, a sponge, wire cutter, tweezer, soldering pen, solder wire, solder rest, two electronic wires and many more.


  • The soldering station has a digital display with a big knob for changing and seeing the real-time temperature.
  • The temperature readout can be changed to Fahrenheit with the push of a button.
  • Features a sleep mode for long usage without draining too much power.
  • The iron can heat up only in a few seconds.


  • The internal ceramic in the handpiece has less durability.

5. POWER PROBE Butane Soldering Kit


  • Butane Powered
  • Dimension: 10.3 x 4.5 x 1.5
  • Watt: 120
  • BTU: 500
  • Max Temp [Torch]: 2500 °F
POWER PROBE Butane Soldering Kit

Here is another soldering iron manufactured by a market-leading brand. The POWER PROBE Butane Soldering Kit has the potential to turn your work experience better by making it quicker. Your jewelry-making projects, which require high concentration, can have results with proper preciseness. It also features some durable accessories.

Apparently, experts told us that this soldering iron is suitable for solder workers with little to high skill. You can handle the parts with ease. If you do not understand anything, you can read the instructions on the case. You can start the iron and adjust the flames. The buttons and switches are on the handle. It is possible to gain a temperature of 930-degree F.

Speaking of flame, you can adjust it within 0.5 to 1.25 inches. It requires butane as a source of fuel. It’s an electronic igniter that requires less energy. Since it weighs only 0.01 ounces, it is easy to wield for a long time.

POWER PROBE added four iron tips into the package. You will get a mini screwdriver too. There is a durable case where all the items stay in. Take this item to your jewelry workshop soon.


  • Handheld cord-free soldering with the power of butane.
  • Comes with an organized case for easy carrying with instructions to use it properly.
  • Reaches up to 950 degrees Fahrenheit for soldering, suitable a range of tasks.
  • Can be used for brazing, heat shrink wrapping, splicing, etc., along with soldering.


  • Has durability issues.
  • The open port on the top isn't the safest, and you need to be extra careful while using this unit.

6. Jewelry Soldering Kit with Butane Torch


  • Weight: 6.49 pounds
  • Dimensions: 12 x 7 x 9
  • Handy Flux
  • Magnesia Soldering Block
  • Copper Tongs with Curved Tip
Jewelry Soldering Kit with Butane Torch

For all your jewelry-making projects, the Jewelry Soldering Kit with Butane Torch has all the necessary parts included in the package. Once you get your hand on this complete set, you do not need to look elsewhere for any additional tool. The iron is powerful enough that keeps the temperature flow steady all the time.

Whether you go for silver or gold soldering, this jewelry soldering kit got them all. This item is user-friendly, and any novice can use it with ease. Jewelry making requires patient and preciseness. With this soldering iron, you can gain that as it is suitable for soldering small jewelry parts.

Additionally, you will get three solder wires and 10 ounces of sparex pickle. Not to mention, to protect the soldering area of the jewelry, there is a paste flux of 0.5 lb. There are some tweezers of different types as well.

The soldering-block is fire-resistance. For a comfortable set-up, you will get a tripod with a size of six by six and legs nine inches in height. All these parts make this product highly praiseworthy.


  • Comes with everything you need to start soldering jewelry.
  • Features a butane torch that is a must for a lot of projects.
  • The soldering guideline book is an excellent addition for complete beginners.
  • Suitable for soldering silver, gold, brass, PMC3, etc.


  • The butane torch is somewhat weaker than what you would get from an individual torch.

Buying Guide for Best Soldering Iron for Making Jewelry

Buying a soldering iron for jewelry making can be easy, but buying the best one is not. The moment you think you have found the right one, another better one may appear. So, to make a better pick, you should analyze every aspect of it. But that is not possible without enough knowledge on the matter.

Hence, we made a short buying guide to discuss the necessary considerations to take before purchasing.


The amount of power that your soldering iron has is the wattage of it. The soldering iron uses this power to deliver temperature to the tip. So, if there is more wattage, the temperature flow increases.

Meanwhile, too much heat can be bad for some specific applications. For jewelry making, you should focus on soldering irons with wattages between 60 to 100. You can filter out the rest.

If you want to buy an iron for any different application, you must check the power requirement for that project. Higher power is not always the best in this case.

Temperature Control

You will need different temperatures for different parts of the work. Hence, the soldering iron must give you a wide range of temperature control. Apparently, without enough temperature to the iron, your metal will not melt quickly. Meanwhile, much heating can cause the tip to burn or ruin the metals.

So, always look for a temperature range between 250 to 900-degree F. Of course, it can be a little different, but you get the picture.

Desoldering Pump

Suppose you have soldered any part wrongly and now need to extract the soldering. The best thing to do that is with a desoldering pump. Check whether your soldering iron comes with a desoldering pump with high pressure.

It will help you so much. As you work, eventually there will be moments when you need to desolder. So, it is better to already have it at hand than going for additional purchases. Make sure that the desoldering pump that you got is of good quality.


You can find two types of soldering iron. They are the pencil-type and the hatchet-type.

The hatchet-type irons are shaped like L. Meanwhile, the pencil-type soldering irons are straight. So, whatever shape you prefer most, it is your call.

When you actually go for quality soldering irons, you will find out that most high-quality ones are pencil-shaped. We are not saying that hatchet-types are bad though.

Frequently Asked Questions

What Type of Soldering Iron Should I Use for Jewelry?

For jewelry, ceramic irons are better since they heat up fast. You also should pick one with the least wattage of 60. Go for those with many accessories included in the package. You will need all those instruments in your jewelry projects. So, you can save some money by getting them within just one package.

Can You Use A Soldering Iron for Jewelry?

Yes, soldering iron is a vital tool to work with jewelry. Soldering iron will be mandatory to bend, joint, and shape the metals.

Can I Solder Sterling Silver with A Soldering Iron?

Soldering sterling silver with a soldering iron is not a wise choice. It does not go with the material. If you want to solder sterling silver, get yourself a gas torch.

What Is Cold Soldering on Jewelry?

Cold heat soldering is a type of soldering irons that has insane temperature changing capability. They can heat up, melt the materials, and then cool off- all within some seconds. As a result, they can be excellent tools to use for repairing loose joints or jewelry making.

Final Note

Jewelry making is a work where you need to concentrate on the work highly. Even a little mistake is not acceptable. It is not like many other soldering projects where you can solder it in many ways. So, your soldering iron must be capable of pulling that off by providing the exact result that you want.

While there are lots of soldering iron on the market, you will have to filter out most of them. So, filter the ones that are not from a brand. This way, you can get only the most reliable soldering irons. Well-known brands also offer better customer service.

Last Updated on 1 year by Richard Boyer

  • June 28, 2022
Richard Boyer

Richard Boyer has been a professional welder for over 27 years of his life, and now he is a trainer and blogger providing critical information to anyone interested in welding. He is helping out both hobbyists, novice and professional welders to learn newer and better techniques. Read more about me

Click Here to Leave a Comment Below 0 comments

Leave a Reply: