6 Everlast Welder Reviews In 2022 With Comparison Chart
Disclaimer: Welderscave.com is user-supported and we may earn a small commission whenever you chose products from our Amazon product links without any additional cost to you.
Everlast welders are making a name for themselves amongst professional welders. The machines have all of the innovative features that a welder wants and they have all of the power and reliability a welder needs.
Our experts put the Everlast machines through rigorous testing to make sure that they were durable, capable, reliable, and technically advanced. They even had beginning welders try the machines to determine if they were easy to use, and easy to setup.
The experts were delighted to tell us that the following Everlast products are items they would buy for themselves, or would recommend to their friends.
Quick Look On Our Favorites
The 6 Best Everlast Welder Reviews 2022
1. 2022 Everlast 62i CNC Cutting System
Specifications
- CNC compatible plasma cutter
- Upgraded Display
- Color coded LED guide system properly set the air pressure
- New gouge feature.
This Everlast PowerPlasma is a commercial class device that has a 60% duty cycle at 60 amps. It makes precise clean cuts because of the innovative iPT 62 Torch.
The iPT torch is an Italian designed cutting torch that with new features like; the 3 minute tip saver, the blow back start, and the ability to cut a variety of metals, even the dirty ones.
The torch is recommended for making daily cuts of 3.4”. It can make a 1” clean cut and has the ability to make a severance cut on metal that is 1 ¼” thick. It can be used on painted metals, dirty metals, and metals that do not have a smooth or flat surface area.
This plasma cutter comes with:
- The iPT 62 hand held torch and has a Euro quick connect adaptor to make set up easier to do.
- You get a 10’ long cable with a work clamp and DINSE connector on the ends.
- An air pressure regulator that is also a water trap.
- Consumable starter kit.
- It can cut 3/” at 15 – 20 inches per minute.
- 1” at 8 to 12 inches per minute.
- 1 ¼” at 3-5 inches per minute.
Pros
Cons
2. EVERLAST Power-ARC Dual Voltage Welder
Specifications
- Item Weight: 30 pounds
- Dimensions: 20 x 12.5 x 13.5 inches
- Part Number: Pa200st
- Manufacturer: Everlast
- Color: Green
This is a combination welder that can perform TIG processes and stick processes. The machine weighs only 30 pounds and measures 15” x 11” x 7”. The external housing is made from stainless steel.
You can use this machine with a common 110 volt house current or with a heavier 220 volt house current. When using the 110 volt current the machine can handle a 3/32 rod size, and with the 220 volt current it can handle rod sizes of 5/32nd and 1/8.
The controls on the machine are simple and easy to understand. The instruction manual is concise and once you have set the machine up a couple of times you will not even have to refer back to the machine.
It is amazing quiet for a welding machine. It also creates smooth welds that need very little cleanup after you are finished. It is perfect for hobby welders, homeowners, shop owners, and more.
You can weld with the 6010 cellulose welding rods, or use the E7018, E7024, E7014, and there are additional connector ports to accommodate almost all other welding rods. The amount of splatter will be so low that your project time will be reduced greatly.
Pros
Cons
3. EVERLAST Power-ARC IGBT Welder Dual Voltage
Specifications
- Item Weight: 24.8 pounds
- Dimensions: 20 x 12.5 x 13.5 inches
- Part Number: PA-140STi
- Material: Metal
- Voltage: 240 volts
This Everlast combination welder has 25mm DINSE style connectors that twist as they are going in place and lock into position so they do not come unconnected while you are working.
The TIG torch has a manual gas valve built into the handle to help you control the heat settings perfectly as you weld. This precise heat control allows you to weld stainless steel, aluminum, most thin metals, and even metals that are not smooth, or metals that have been painted, or have rusted.
It is a dual voltage machine that can be operated on 110 volt currents and on 240 volt currents. It can perform SMAW welding processes or DC GTAW welding processes. When using the 110 volt current the machine will have a maximum 85 amp output, but with the 240 volt current the machine output will be as much as 140 amps.
The welder has an automatic hot start that will help prevent your electrodes from sticking while you are welding. That means less splatter and less after weld cleaning of the piece.
It comes with a 17v TIG torch, a work clamp and cable, a stick electrode holder with the necessary cable, a wire brush, and a high impact resistant carry case made of plastic.
Pros
Cons
4. 2019 EVERLAST Power-ARC 161 HF Welder Dual Voltage
Specifications
- Item Weight: 40 pounds
- Dimensions: 20 x 12.5 x 13.5 inches
- Part Number: PowerArc 160STHH
- Color: Green
- Batteries Required: No
This is a 40 pound welding machine that measures 20 x 12.5 x 13.5 inches. The outer housing is stainless steel that is painted green in the Everlast signature color. It is a combination welder that performs both TIG processes and Stick processes.
This machine has top of the line features such as voltage reduction and anti-electrode stick. It has hot start technology built into it so your welding rods will be less likely to stick while you are making the weld.
This is a dual voltage machine that can provide 90 amps of output when it is powered by a 110 volt household current. If you plug the machine into a 220 volt outlet you will be able to have 140 amps of output. Switching from 110 volt to 220 volt is as easy as turning a knob.
The settings are easy to read, easy to understand, and easy to change. You can easily set this machine up and be welding in less than 12 minutes.
This machine can weld almost anything. Including, (but not limited to):
- Mild steel
- Aluminum
- Stainless steel
- Galvanized steel
- Pipe
- Steel alloy
- Cast iron
- Copper
- Brass
- Thin metals and specialty metals
Pros
Cons
5. 2019 Everlast FLUX Core Welder
Specifications
- Item Weight: 42 pounds
- Used with both 4" and 8" Wire Spools
- Part Number: MIG-140E
- Batteries Required: No
This MIG welder is specifically designed for homeowners, hobbyist, and around your farm or ranch. It weighs only 42 pounds so it is easy to transport having a price under 1000.
The latest technology has been used in the creation of the controls and settings so you will easily be able to set the machine up in a few minutes. It is powerful enough to weld the majority of all metals and can be used for fabrication or repair jobs. It is powered by your common 110 volt household outlets so you can use it anywhere you have a plug in.
It comes complete with:
- An Argon/CO2 regulator.
- A 15 series MIG gun.
- A work clamp.
- A consumable start kit that can weld 3/16” on one pass, and 3/8” on multiple passes.
You can weld aluminum, and the majority of all metals using this machine. It is powerful and enables you to make welds on thicker pieces of metal than your common TIG welder can.
It creates smooth and stable welds that are powerful, strong, and durable. It can be lifted and repositioned easily, and is small enough that you do not have to have a big truck to carry the machine around on.
Pros
Cons
6. 2019 Everlast Power-TIG Stick Welder
Specifications
- Item Weight: 40 pounds
- Dimensions: 24 x 9 x 17 inches
- Part Number: PowerTig 185
- Material: Stainless Steel
- Batteries Required: No
This is a powerful combination welder that provides 185 amps at a 35% duty cycle when powered by 220 v0pt currents. The machine is also capable of being operated on a 115 volt current. On that current the output will be reduces to about 90 amps.
When powered by 240 volt it is powerful enough to weld:
- Steel that is up to 5/16” thick in a single pass.
- Steel that is up to ½” with several passes.
- Aluminum that is as much as ¼” thick on a single pass.
- Aluminum that is as much as 3/8” thick with multiple passes.
When powered by 110 volt it is powerful enough to weld:
- Steel that is up to 3/16” in a single pass.
- Steel that is up to 3/8” thick with multiple passes.
- Aluminum that is1/8” in a single pass.
- Aluminum that is ¼” with multiple passes.
This is a lightweight and portable machine that can be used in the majority of welding situations by both beginning welders and experts. You can make repairs to farm and lawn equipment, repair automobile bodies and parts, fabricate crafts and furniture, and do almost all of the welding you shall ever want to do.
Pros
Cons
About the Everlast Brand
The Everlast welding machines and generators are made by Everlast Power Products Inc. They are an e-based company that started their business operations in 2004 in San Francisco.
Since they began their operations they have quickly became synonymous with high quality welding machines. This reputation for quality products is why they are now selling their products in many countries.
When they began to design their products they decided it made sense to figure out what the customer would want from a welding machine. When they were pretty certain they knew what their customers would want the most they turned over that list to their design crew and asked them to make sure their products had the list of features designed into them.
The products are constructed off-shore. They are all crafted using the best name brand parts, and the company takes customer satisfaction and customer support very seriously. The customer support teams for Everlast Power Products are all located in the United States.
The company takes pride in producing a quality item at a low cost to the consumer. Most of their ability to keep prices low centers on the fact that they do not have the same overhead cost that most of the traditional manufacturers, and suppliers have.
Frequently Asked Questions
What TIG torch do you use on Everlast welder?
ProFlex TIG torches are recommended for use with the Everlast welding machines and devices. Some TIG torches are interchangeable but in order to get the most satisfactory welds out of your welding machine, it is recommended that you use the torch suggested by the manufacturer.
How is the Everlast welder customer service?
You will find the Everlast customer service to be some of the best there is. The staff is knowledgeable about the products, they are kind and they really listen to what you are saying. The customer service staff will go above and beyond your expectations to make sure that you are a satisfied customer.
Where to buy Everlast welder?
There are several places that sell Everlast welding machines. Big chain stores like Lowe’s Home Improvement, Home Depot, Harbor Freight Tools, and more offer this brand of welding machine among their inventory. You can also visit the Everlast website and order products directly from them.
Final Note
When you go to buy a welding machine you want to purchase one that is reliable, durable, built to last, and made by a company you can trust. Everlast Power Products Inc. is a relatively new manufacturer of these devices, but in the time they have been making welders and generators they have proven to be an honest company, that wants to provide the best product they can.
Check out the features the Everlast welding machines have, and compare them to the features of other machines. Then compare the materials the machines are crafted from, read the reviews from actual owners, and try to get the best machine you can for the money you have to spend.
Last Updated on 1 year by Richard Boyer
